Specifications:
Brand Name: EACHINE
Mode Name: US65/UK65
Item Name: 1S 65mm Brushless Whoop racing drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: 21.5g(without battery)
Weight:28g(with Original 250mah lipo battery)
SE0603 KV19000 Motor
Mode: SE0603 KV19000
Configu-ration:9N12P
Stator Diamter:6mm
Stator Length:3mm
Shaft Diameter:Φ0.8mm
Motor Dimension(Dia.*Len):Φ9mm*15.5mm
Weight(g):1.8g
No.of Cells(Lipo):1S
Flight controller
Firmware: Betaflight_3.4.0_Crazybee
Betaflight target:
CRAZYBEEF3FR(Frsky version)
CRAZYBEEF3FS(Flysky version)
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 6A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry(D8/D16 switchable)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Onboard 4in1 6A ESC
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 6A continuous peak 7A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Default protocol: DSHOT600
Frsky receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible both D8 and D16 transmitter
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
AIO Camera&VTX
Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Smartaudio ready
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9"12.0mm ( L*W )
Weight: 3g
Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 40C
Instantaneous discharge rate: 80C
Size: 60mmx18mmx7mm
Weight: 6.5g
Connector: PH2.0
Features:
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
Powerful Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
Adjust the settings and the PID of the flight controller via OSD
Frsky version support both D8 and D16 transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Turtle mode ready
Package Included:
1 x 65mm Brushless whoop Frame (US or UK to choose)
1 x Crazybee F3 ForFC (Frsky and Flysky option)
4 x SE0603 KV19000 Motor
1 x 31mm propeller(4cw+4ccw)
1 x AIO Camera & VTX with smartaudio
3 x 3.8v 250mah 40C/80C battery
1 x 1S06 6 way Lipo/LIHV charger
1 x Propeller disassemble tool
1 x Screwdriver